|
Carved wooden pattern
painted with aluminum parting paint ready to make mold.

Complete mold ready
to move, attach pour box and runners so metal can find its way
into the mold. |
Working
title: NEW ECHO
about 9' tall. Glass,
cast iron and cast bronze.
This piece was commissioned
through Sandra Ainsley Gallery
in Toronto
These are images of
the pattern for the cast iron lower half of the piece and various
stages in making the mold in preparation for pouring the cast
iron.

Blowing off excess
sand after first half of mold is set.
.
Mold ready for second
half to be made.

Bonded sand being poured
into mold over dusted first half.

Top half of mold lifted
off and being inspected.
|

Furnace spewing sparks
after being charged with scrap metal.

Foundryman charging
furnace.

Molds "gassing
off" after pour is completed. |

Pouring cast iron into
crucible.

Pouring cast iron from
crucible into sand molds.

|
|
Assembled
piece with bronze band in centre for fitting. Bronze will be patinated
blue/green/black as in images to the right..
On the
left the piece is temporarily on studio deck between fall gales
and rain. |
Two views of New Echo
assembled in the studio for sealing glass in bronze casting. When
installed, the base will be below the ground and not visible. |